dmesg - Intel Core i3-4150
microcode: microcode updated early to revision 0x28, date = 2019-11-12
Linux version 5.8.12-200.fc32.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 10.2.1 20200723 (Red Hat 10.2.1-1), GNU ld version 2.34-4.fc32) #1 SMP Mon Sep 28 12:17:31 UTC 2020
Command line: BOOT_IMAGE=/vmlinuz-5.8.12-200.fc32.x86_64 root=/dev/mapper/fedora_localhost--live-root00 ro resume=/dev/mapper/fedora_localhost--live-swap00 rd.lvm.lv=fedora_localhost-live/root00 rd.lvm.lv=fedora_localhost-live/swap00 rhgb quiet
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ccb37fff] usable
BIOS-e820: [mem 0x00000000ccb38000-0x00000000ccb3efff] ACPI NVS
BIOS-e820: [mem 0x00000000ccb3f000-0x00000000cd3d5fff] usable
BIOS-e820: [mem 0x00000000cd3d6000-0x00000000cd610fff] reserved
BIOS-e820: [mem 0x00000000cd611000-0x00000000de43afff] usable
BIOS-e820: [mem 0x00000000de43b000-0x00000000de7a8fff] reserved
BIOS-e820: [mem 0x00000000de7a9000-0x00000000de7e7fff] usable
BIOS-e820: [mem 0x00000000de7e8000-0x00000000de8a9fff] ACPI NVS
BIOS-e820: [mem 0x00000000de8aa000-0x00000000df7fefff] reserved
BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. B85M-DS3H-A/B85M-DS3H-A, BIOS F3 06/23/2017
tsc: Fast TSC calibration using PIT
tsc: Detected 3492.168 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FF0000000 write-back
2 base 0210000000 mask 7FF8000000 write-back
3 base 0218000000 mask 7FFC000000 write-back
4 base 021C000000 mask 7FFE000000 write-back
5 base 021E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd700-0x000fd70f]
Using GB pages for direct mapping
RAMDISK: [mem 0x32dd8000-0x356e3fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DE877078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DE883988 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DE877178 00C80C (v02 ALASKA A M I 00000088 INTL 20091112)
ACPI: FACS 0x00000000DE8A8080 000040
ACPI: APIC 0x00000000DE883A98 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DE883B10 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DE883B58 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000DE884098 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG 0x00000000DE884B70 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DE884BB0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DE884BE8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DE884F58 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
NODE_DATA(0) allocated [mem 0x21efd5000-0x21effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000ccb37fff]
node 0: [mem 0x00000000ccb3f000-0x00000000cd3d5fff]
node 0: [mem 0x00000000cd611000-0x00000000de43afff]
node 0: [mem 0x00000000de7a9000-0x00000000de7e7fff]
node 0: [mem 0x00000000df7ff000-0x00000000df7fffff]
node 0: [mem 0x0000000100000000-0x000000021effffff]
Zeroed struct page in unavailable ranges: 11819 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
On node 0 totalpages: 2085333
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14153 pages used for memmap
DMA32 zone: 905785 pages, LIFO batch:63
Normal zone: 18368 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xccb38000-0xccb3efff]
PM: hibernation: Registered nosave memory: [mem 0xcd3d6000-0xcd610fff]
PM: hibernation: Registered nosave memory: [mem 0xde43b000-0xde7a8fff]
PM: hibernation: Registered nosave memory: [mem 0xde7e8000-0xde8a9fff]
PM: hibernation: Registered nosave memory: [mem 0xde8aa000-0xdf7fefff]
PM: hibernation: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2052727
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-5.8.12-200.fc32.x86_64 root=/dev/mapper/fedora_localhost--live-root00 ro resume=/dev/mapper/fedora_localhost--live-swap00 rd.lvm.lv=fedora_localhost-live/root00 rd.lvm.lv=fedora_localhost-live/swap00 rhgb quiet
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 8047832K/8341332K available (14339K kernel code, 2492K rwdata, 8624K rodata, 2504K init, 4648K bss, 293500K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x3e/0x610 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 43497 entries in 170 pages
ftrace: allocated 170 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32566a4cee9, max_idle_ns: 440795296858 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6984.33 BogoMIPS (lpj=3492168)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2
MDS CPU bug present and SMT on, data leak possible. See for more details.
#3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (27937.34 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xccb38000-0xccb3efff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xde7e8000-0xde8a9fff] (794624 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
xor: automatically using best checksumming function avx
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 11:57:00, date: 2020-10-08
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1602158220.011:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
raid6: skip pq benchmark and using algorithm avx2x4
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8C75D557E000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8C75D5FC2000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8C75D55E7400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1002:699f] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xf7e00000-0xf7e3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:04:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
iommu: Default domain type: Translated
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xccb38000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd3d6000-0xcfffffff]
e820: reserve RAM buffer [mem 0xde43b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde7e8000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fee000-0xf7feefff] has been reserved
system 00:07: [mem 0xf7fd0000-0xf7fdffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x669 took 16315 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x669 took 15612 usecs
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 42032K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xda43b000-0xde43b000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.5.1 model 0x3C
intel_idle: Local APIC timer is reliable in all C-states
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 28
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16280 irq 28
ata5: DUMMY
ata6: DUMMY
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f18000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.12-200.fc32.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.12-200.fc32.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.8.12-200.fc32.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.8.12-200.fc32.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2020-10-08T11:57:00 UTC (1602158220)
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
RPL Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: sig=0x306c3, pf=0x2, revision=0x28
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (799297126, 3249155)->(804449900, -1903619)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 5bb1aaa2ccb2769066fd4775c420032178d84b55'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, crc32c=crc32c-generic
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
PM: Magic number: 8:234:984
RAS: Correctable Errors collector initialized.
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-10: WDC WDS240G2G0A-00JH30, UF220400, max UDMA/133
ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32)
ata4.00: ATAPI: DRW-24F1ST d, 1.00, max UDMA/133
ata2.00: ATA-8: Hitachi HDE721010SLA330, ST6OA3BF, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata4.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WDS240G2G0A- 0400 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA Hitachi HDE72101 A3BF PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM ASUS DRW-24F1ST d 1.00 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-5: new full-speed USB device number 2 using xhci_hcd
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2504K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1616K
usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/vmlinuz-5.8.12-200.fc32.x86_64
usb 3-5: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
systemd[1]: systemd v245.8-2.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
usb 3-8: new high-speed USB device number 3 using xhci_hcd
fuse: init (API version 7.31)
systemd[1]: Finished Load Kernel Modules.
audit: type=1130 audit(1602158221.141:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Apply Kernel Variables.
audit: type=1130 audit(1602158221.150:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1602158221.156:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602158221.166:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602158221.198:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 3-8: unable to read config index 0 descriptor/start: -71
usb 3-8: can't read configurations, error -71
audit: type=1130 audit(1602158221.293:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602158221.335:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1602158221.335:9): prog-id=6 op=LOAD
audit: type=1334 audit(1602158221.335:10): prog-id=7 op=LOAD
usb 3-8: new high-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3491.913 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255790e5ea, max_idle_ns: 440795224414 ns
clocksource: Switched to clocksource tsc
usb 3-8: unable to read config index 0 descriptor/all
usb 3-8: can't read configurations, error -61
usb usb3-port8: attempt power cycle
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
libphy: r8169: probed
r8169 0000:03:00.0 eth0: RTL8168g/8111g, 40:8d:5c:2c:48:d7, XID 4c0, IRQ 30
r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
AMD-Vi: AMD IOMMUv2 functionality not available on this system
r8169 0000:03:00.0 enp3s0: renamed from eth0
usb 3-8: new high-speed USB device number 5 using xhci_hcd
usb 3-8: device descriptor read/all, error -71
usb 3-8: new high-speed USB device number 6 using xhci_hcd
usb 3-8: device descriptor read/all, error -71
usb usb3-port8: unable to enumerate USB device
[drm] amdgpu kernel modesetting enabled.
CRAT table not found
Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
amdgpu 0000:01:00.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1DA2:0xE367 0xC7).
amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[drm] register mmio base: 0xF7E00000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller pci_map_rom+0x6c/0x19d mapping multiple BARs
amdgpu 0000:01:00.0: No more image in the PCI ROM
amdgpu: ATOM BIOS: 113-3672S-US1
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:01:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 128bits GDDR5
[TTM] Zone kernel: Available graphics memory: 4049054 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400900000).
[drm] Chained IB support enabled!
usb 3-12: new low-speed USB device number 7 using xhci_hcd
amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[drm] Found UVD firmware Version: 1.130 Family ID: 16
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
usb 3-12: New USB device found, idVendor=0458, idProduct=0186, bcdDevice=24.58
usb 3-12: New USB device strings: Mfr=4, Product=40, SerialNumber=0
usb 3-12: Product: Wired Mouse
usb 3-12: Manufacturer: KYE SYSTEMS CORP.
input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/0003:0458:0186.0001/input/input3
hid-generic 0003:0458:0186.0001: input,hidraw0: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:14.0-12/input0
usbhid 3-12:1.1: couldn't find an input interrupt endpoint
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 214000
[drm] DM_PPLIB: 551000
[drm] DM_PPLIB: 734000
[drm] DM_PPLIB: 980000
[drm] DM_PPLIB: 1046000
[drm] DM_PPLIB: 1098000
[drm] DM_PPLIB: 1124000
[drm] DM_PPLIB: 1206000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 120600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 625000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 120600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.84!
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x699f:0x1002]
kfd kfd: added device 1002:699f
amdgpu 0000:01:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8
[drm] fb mappable at 0xE0E30000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.38.0 20150101 for 0000:01:00.0 on minor 0
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[228]: Received SIGTERM from PID 1 (systemd).
SELinux: Permission watch in class filesystem not defined in policy.
SELinux: Permission watch in class file not defined in policy.
SELinux: Permission watch_mount in class file not defined in policy.
SELinux: Permission watch_sb in class file not defined in policy.
SELinux: Permission watch_with_perm in class file not defined in policy.
SELinux: Permission watch_reads in class file not defined in policy.
SELinux: Permission watch in class dir not defined in policy.
SELinux: Permission watch_mount in class dir not defined in policy.
SELinux: Permission watch_sb in class dir not defined in policy.
SELinux: Permission watch_with_perm in class dir not defined in policy.
SELinux: Permission watch_reads in class dir not defined in policy.
SELinux: Permission watch in class lnk_file not defined in policy.
SELinux: Permission watch_mount in class lnk_file not defined in policy.
SELinux: Permission watch_sb in class lnk_file not defined in policy.
SELinux: Permission watch_with_perm in class lnk_file not defined in policy.
SELinux: Permission watch_reads in class lnk_file not defined in policy.
SELinux: Permission watch in class chr_file not defined in policy.
SELinux: Permission watch_mount in class chr_file not defined in policy.
SELinux: Permission watch_sb in class chr_file not defined in policy.
SELinux: Permission watch_with_perm in class chr_file not defined in policy.
SELinux: Permission watch_reads in class chr_file not defined in policy.
SELinux: Permission watch in class blk_file not defined in policy.
SELinux: Permission watch_mount in class blk_file not defined in policy.
SELinux: Permission watch_sb in class blk_file not defined in policy.
SELinux: Permission watch_with_perm in class blk_file not defined in policy.
SELinux: Permission watch_reads in class blk_file not defined in policy.
SELinux: Permission watch in class sock_file not defined in policy.
SELinux: Permission watch_mount in class sock_file not defined in policy.
SELinux: Permission watch_sb in class sock_file not defined in policy.
SELinux: Permission watch_with_perm in class sock_file not defined in policy.
SELinux: Permission watch_reads in class sock_file not defined in policy.
SELinux: Permission watch in class fifo_file not defined in policy.
SELinux: Permission watch_mount in class fifo_file not defined in policy.
SELinux: Permission watch_sb in class fifo_file not defined in policy.
SELinux: Permission watch_with_perm in class fifo_file not defined in policy.
SELinux: Permission watch_reads in class fifo_file not defined in policy.
SELinux: Permission perfmon in class capability2 not defined in policy.
SELinux: Permission bpf in class capability2 not defined in policy.
SELinux: Permission perfmon in class cap2_userns not defined in policy.
SELinux: Permission bpf in class cap2_userns not defined in policy.
SELinux: Class perf_event not defined in policy.
SELinux: Class lockdown not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=0
systemd[1]: Successfully loaded SELinux policy in 135.775ms.
systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 24.869ms.
systemd[1]: systemd v245.8-2.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Login Prompts.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on multipathd control socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Activating swap /dev/mapper/fedora_localhost--live-swap00...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Starting Preprocess NFS configuration convertion...
systemd[1]: plymouth-switch-root.service: Succeeded.
systemd[1]: Stopped Plymouth switch root service.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Stopped Journal Service.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Repartition Root Disk...
Adding 8232956k swap on /dev/mapper/fedora_localhost--live-swap00. Priority:-2 extents:1 across:8232956k SSFS
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: sysroot.mount: Succeeded.
systemd[1]: Activated swap /dev/mapper/fedora_localhost--live-swap00.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: nfs-convert.service: Succeeded.
systemd[1]: Finished Preprocess NFS configuration convertion.
systemd[1]: Reached target Swap.
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting Temporary Directory (/tmp)...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
kauditd_printk_skb: 66 callbacks suppressed
audit: type=1305 audit(1602176225.000:77): op=set audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Condition check resulted in Create System Users being skipped.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
audit: type=1130 audit(1602176225.044:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602176225.090:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602176225.125:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-repart comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[600]: Received client request to flush runtime journal.
audit: type=1130 audit(1602176226.194:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602176226.286:82): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602176226.698:83): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1602176226.698:84): prog-id=21 op=LOAD
audit: type=1334 audit(1602176226.698:85): prog-id=22 op=LOAD
audit: type=1130 audit(1602176227.074:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200528/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200528/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200528/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-4: 2/4 memory slots populated (from DMI)
input: PC Speaker as /devices/platform/pcspkr/input/input4
i2c i2c-4: Successfully instantiated SPD at 0x52
i2c i2c-4: Successfully instantiated SPD at 0x53
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
usbcore: registered new interface driver btusb
Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018
at24 4-0052: supply vcc not found, using dummy regulator
cfg80211: Loading compiled-in X.509 certificates for regulatory database
iTCO_vendor_support: vendor-support=0
at24 4-0052: 256 byte spd EEPROM, read-only
at24 4-0053: supply vcc not found, using dummy regulator
at24 4-0053: 256 byte spd EEPROM, read-only
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
Intel(R) Wireless WiFi driver for Linux
snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
iwlwifi 0000:04:00.0: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:04:00.0: Found debug configuration: 0
iwlwifi 0000:04:00.0: loaded firmware version 36.79ff3ccf.0 8000C-36.ucode op_mode iwlmvm
iwlwifi 0000:04:00.0: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save blacklist, forcing power_save to 0
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain dram
iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:04:00.0: Allocated 0x00400000 bytes for firmware monitor.
iwlwifi 0000:04:00.0: base HW address: ac:ed:5c:4d:ed:60
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone3: failed to read out thermal zone (-61)
iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
r8169 0000:03:00.0 enp3s0: Link is Down
iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring
iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring
wlp4s0: authenticate with 4c:81:20:2d:12:15
wlp4s0: send auth to 4c:81:20:2d:12:15 (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 4c:81:20:2d:12:15 (try 1/3)
wlp4s0: RX AssocResp from 4c:81:20:2d:12:15 (capab=0x511 status=0 aid=98)
wlp4s0: associated
wlp4s0: Limiting TX power to 36 (36 - 0) dBm as advertised by 4c:81:20:2d:12:15
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
rfkill: input handler disabled
rfkill: input handler enabled
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11